Do you really use a device to look at biopsies

We know that in some plant and animal cells it is necessary to use a microscope for observation. Therefore, the use of bioslicing is inevitable. However, many users do not know how to use bioslicing better. Therefore, I would like to take this opportunity to explain to you how to use bioslicing properly.

1. Take and place the lens: First, hold the microscope arm with the right hand and the microscope base with the left hand to remove the microscope. Then, place it 7cm away from the edge of the experimental platform, slightly to the left, and install the eyepiece and objective lens.

2. Adjust the light: By adjusting the biological microscope converter, the low-power objective is aligned with the light hole, and the aperture is adjusted to a larger size. The left eye focuses on the eyepiece, while the right eye opens and turns the mirror until it sees a bright white circular field of view.

3. Operation steps: First, place the biological specimen to be observed on the microslide and fix it with the clip. It is necessary to ensure that the specimen in the microslide is located in the center of the light hole. Next, turn the coarse focus regulator so that the objective lens is gradually closer to the microslide, while gazing inside the eyepiece with the left eye, and rotate the coarse focus regulator in a counterclockwise direction until the image is clear. The fine focus adjuster can then be used to fine-tune again for a clearer view.

4. Cleaning and storage: The equipment required for the experiment needs to be sorted out, and the biological microscope pieces should be cleaned and put back in the toolbox.

Related Tags: Biological slicing, biological slicing manufacturers, biological slicing prices,

我们知道，在一些动植物细胞中，必须使用显微镜进行观察。因此，不可避免地需要使用生物切片。然而，许多用户并不知道如何更好地使用生物切片。因此，这里想利用这个机会来向大家讲解如何正确地使用生物切片。

　　1.取镜和安放：首先用右手握住显微镜臂，左手托住显微镜底座取下显微镜，然后将它放置在距离实验台边缘7cm处，略微偏向左侧的位置，并安装好目镜和物镜。

　　2.调整光线：通过调整生物显微镜转换器，将低倍物镜对准通光孔，并将光圈调整为较大的尺寸。左眼注视目镜，右眼则睁开并转动反光镜，直到看到一个明亮的白色圆形视野。

　　3.操作步骤：先将待观察的生物标本放到显微玻片上，并使用夹片固定好，需要确保显微玻片中的标本正好位于通光孔的中心位置。接着，转动粗焦调节器使物镜逐渐靠近显微玻片，同时用左眼凝视目镜内部，在逆时针方向旋转粗焦调节器，直到物像清晰为止。然后，可用细焦调节器再次微调以达到更加清晰的观察效果。

　　4.清洁与收纳：需要整理实验所需的装备，并将生物显微镜片清理干净后放回工具箱中。